diff -ru bluez-utils-3.8/hidd/dinovo.conf bluez-utils-3.8/hidd/dinovo.conf --- /dev/null 2006-12-29 18:32:17.000000000 -0500 +++ bluez-utils-3.8/hidd/dinovo.conf 2006-12-29 18:31:09.000000000 -0500 @@ -0,0 +1,18 @@ + + + + + + + + + + + + + + + + diff -ru bluez-utils-3.8/hidd/fakehid.c bluez-utils-3.8/hidd/fakehid.c --- bluez-utils-3.8/hidd/fakehid.c 2006-09-29 17:49:18.000000000 -0400 +++ bluez-utils-3.8/hidd/fakehid.c 2006-12-29 18:31:15.000000000 -0500 @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -519,3 +520,374 @@ return 0; } + +/************************ Logitech Mediapad Driver ******************************** + * (C) 2006 Tim Hentenaar * + * Licensed under the GNU General Public License. * + * The latest version of this work is available at http://hentenaar.com * + * * + * Notes: * + * 1) The i18n for the device isn't currently supported. * + * The way that the i18n works, is that when the device * + * connects, the Winblows app retrieves the respective * + * strings from the device and verifies/updates them. * + * * + * Simple enough to do, but I'll worry about it later. * + * 2) The '000' key actually sends 3 0's and is not a special key. * + * 3) The "Copy calulator result to clipboard" requires an * + * activation packet that I haven't isolated to date. * + * 4) Git-R-Done! * + **********************************************************************************/ + +struct mpcmd { + char command[22]; + uint8_t len; +}; + +struct mpcmd clscr[] = { /* Clear the screen */ + {{ 0xA2, 0x10, 0x00, 0x80, 0x10, 0x00, 0x01, 0x00 }, 8}, + {{ 0xA2, 0x10, 0x00, 0x81, 0x10, 0x00, 0x00, 0x00 }, 8}, + {{ 0xA2, 0x11, 0x00, 0x82, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, 21}, + {{ 0xA2, 0x10, 0x00, 0x83, 0x11, 0x00, 0x00, 0x00 }, 8}, + {{ 0 }, 0} +}; + +struct mpcmd write_icons[] = { /* Set Icons (0 = off) */ + {{ 0xA2, 0x11, 0x00, 0x82, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, 21} +}; + +struct mpcmd write_ledspk[] = { /* LED / Speaker Control */ + {{ 0xA2, 0x10, 0x00, 0x81, 0x50, 0x00, 0x00, 0x00 }, 8}, + {{ 0xA2, 0x10, 0x00, 0x80, 0x50, 0x00, 0x00, 0x00 }, 8}, + {{ 0 }, 0} +}; + +struct mpcmd write_clock[] = { /* Set the clock */ + {{ 0xA2, 0x10, 0x00, 0x80, 0x31, 0x00, 0x00, 0x00 }, 8}, + {{ 0xA2, 0x10, 0x00, 0x80, 0x32, 0x02, 0x00, 0x00 }, 8}, + {{ 0xA2, 0x10, 0x00, 0x80, 0x33, 0x00, 0x00, 0x00 }, 8}, + {{ 0 }, 0} +}; + +struct mpcmd write_lcd[] = { /* Write text to the LCD */ + {{ 0xA2, 0x10, 0x00, 0x81, 0x10, 0x00, 0x00, 0x00 }, 8}, + {{ 0xA2, 0x10, 0x00, 0x80, 0x12, 0x01, 0x01, 0x01 }, 8}, + {{ 0xA2, 0x10, 0x00, 0x80, 0x10, 0x00, 0x00, 0x00 }, 8}, + {{ 0xA2, 0x11, 0x00, 0x82, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20 }, 21}, + {{ 0xA2, 0x11, 0x00, 0x82, 0x21, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20 }, 21}, + {{ 0xA2, 0x11, 0x00, 0x82, 0x22, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20 }, 21}, + {{ 0xA2, 0x11, 0x00, 0x82, 0x23, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20 }, 21}, + {{ 0xA2, 0x11, 0x00, 0x82, 0x24, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20 }, 21}, + {{ 0xA2, 0x11, 0x00, 0x82, 0x25, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20 }, 21}, + {{ 0xA2, 0x11, 0x00, 0x82, 0x26, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20 }, 21}, + {{ 0xA2, 0x11, 0x00, 0x82, 0x27, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20 }, 21}, + {{ 0xA2, 0x11, 0x00, 0x82, 0x28, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20 }, 21}, + {{ 0xA2, 0x10, 0x00, 0x80, 0x12, 0x00, 0x00, 0x00 }, 8}, + {{ 0xA2, 0x10, 0x00, 0x83, 0x11, 0x00, 0x00, 0x00 }, 8}, + {{ 0 }, 0} +}; +#define N_LCDW_CMDS 14 + +/* LCD Line Flags */ +#define LCD_LINE_DISPLAY 0x10 +#define LCD_LINE_SCROLL 0x20 +#define LCD_LINE_INIT 0x01 +#define LCD_2_BUFFERS 0x02 +#define LCD_3_BUFFERS 0x03 + +/* Icons */ +#define LCD_ICON_EMAIL 0x01 +#define LCD_ICON_IM 0x02 +#define LCD_ICON_MUTE 0x04 +#define LCD_ICON_ALERT 0x08 +#define LCD_ICON_ON 0x01 +#define LCD_ICON_BLINK 0x02 + +/* Speaker / LED */ +#define LCD_LOW_BEEP 0x01 +#define LCD_LONG_BEEP 0x02 +#define LCD_SHORT_BEEP 0x03 + +/* Modes */ +#define MODE_NUM 0x00 +#define MODE_NAV 0x01 + +#define inject_key(X,Y,Z) send_event(X,EV_KEY,Y,Z) + +#define DBUS_API_SUBJECT_TO_CHANGE +#include +#include + +#define dinovo_dbus_do_signal(X) \ + db_msg = dbus_message_new_signal("/com/hentenaar/Dinovo/MediaPad/"X, "com.hentenaar.Dinovo.MediaPad", X); \ + dbus_connection_send(db_conn,db_msg,NULL); dbus_connection_flush(db_conn); dbus_message_unref(db_msg); + +#define dinovo_dbus_do_reply(X) \ + db_msg_reply = dbus_message_new_method_return(X); dbus_connection_send(db_conn,db_msg_reply,NULL); dbus_connection_flush(db_conn); dbus_message_unref(db_msg_reply); + +static char *introspect_ret = +"\n" +" \n" +" \n" +" \n" +" \n" +" \n" +" \n" +" \n" +" \n" +" \n" +" \n" +" \n" +" \n" +" \n" +" \n" +" \n" +" \n" +" \n" +" \n" +" \n"; + +static unsigned char translate_key(int mode, unsigned char key) { + switch(key) { + case 0x54: return KEY_KPSLASH; + case 0x55: return KEY_KPASTERISK; + case 0x56: return KEY_KPMINUS; + case 0x57: return KEY_KPPLUS; + case 0x58: return KEY_KPENTER; + case 0x59: return (mode != 0) ? KEY_OPEN : KEY_1; + case 0x5a: return (mode != 0) ? KEY_LEFTMETA : KEY_2; + case 0x5b: return (mode != 0) ? KEY_UNDO : KEY_3; /* Even though it should be KEY_CLOSE (non-existant) */ + case 0x5c: return (mode != 0) ? KEY_LEFT : KEY_4; + case 0x5d: return (mode != 0) ? KEY_DOWN : KEY_5; + case 0x5e: return (mode != 0) ? KEY_RIGHT : KEY_6; + case 0x5f: return (mode != 0) ? KEY_BACK : KEY_7; + case 0x60: return (mode != 0) ? KEY_UP : KEY_8; + case 0x61: return (mode != 0) ? KEY_FORWARD : KEY_9; + case 0x62: return KEY_0; + case 0x63: return KEY_DOT; + } + return KEY_UNKNOWN; +} + +static void clear_screen(int sock) { + int i = 0; + while (clscr[i].len != 0) { write(sock,clscr[i].command,clscr[i].len); i++; } +} + +static void set_lcd_indicator(int sock, uint8_t indicator, int blink) { + struct mpcmd lcdwi; uint8_t on = (blink >= 1) ? ((blink == 2) ? LCD_ICON_BLINK : LCD_ICON_ON) : 0; int sel = 5; + + if (sock < 4 || indicator == 0) return; + memcpy(&lcdwi,write_icons,sizeof(struct mpcmd)); + while ((indicator & 1) == 0) { sel++; indicator >>= 1; } + while (indicator & 1) { lcdwi.command[sel++] = on; indicator >>= 1; } + write(sock,lcdwi.command,lcdwi.len); +} + +static void beep_or_blink(int sock, uint8_t beep, uint8_t blink) { + struct mpcmd bbeep[3]; int i = 0; + + if (sock < 4) return; + memcpy(bbeep,write_ledspk,sizeof(struct mpcmd)*3); + + if (beep) bbeep[1].command[5] = (beep & 3); + if (blink) bbeep[1].command[6] = 1; + while (bbeep[i].len != 0) { write(sock,bbeep[i].command,bbeep[i].len); i++; } +} + +static void set_clock(int sock) { + struct mpcmd setclk[4]; struct tm tx; time_t tim = 0; int i = 0; + + if (sock < 4) return; + memcpy(setclk,write_clock,sizeof(struct mpcmd)*4); + time(&tim); localtime_r(&tim,&tx); + setclk[0].command[5] = (char)(tx.tm_sec); + setclk[0].command[6] = (char)(tx.tm_min); + setclk[0].command[7] = (char)(tx.tm_hour); + setclk[1].command[6] = (char)(tx.tm_mday); + setclk[1].command[7] = (char)(tx.tm_mon); + setclk[2].command[5] = (char)(tx.tm_year - 100); + + while (setclk[i].len != 0) { write(sock,setclk[i].command,setclk[i].len); i++; } +} + + +static void write_lcd_text(int sock, char *text) { + char lines[16*9]; struct mpcmd *lcdw = NULL; uint32_t i = 0,z = 0,line = 0; uint8_t f1 = LCD_LINE_DISPLAY, f2 = LCD_LINE_DISPLAY, f3 = LCD_LINE_DISPLAY; + + if (!text || sock < 4) return; + memset(lines,0x20,16*9); z = (strlen(text) > 16*9) ? 16*9 : strlen(text); + for (i=0;i 16*3) { + f1 |= LCD_LINE_SCROLL | LCD_2_BUFFERS; f2 |= LCD_LINE_SCROLL | LCD_2_BUFFERS; f3 |= LCD_LINE_SCROLL | LCD_2_BUFFERS; + if (z > 16*6) { f1 &= 0xF0; f1 |= LCD_3_BUFFERS; f2 &= 0xF0; f2 |= LCD_3_BUFFERS; f3 &= 0xF0; f3 |= LCD_3_BUFFERS; } + } + + lcdw[12].command[5] = f1; + lcdw[12].command[6] = f2; + lcdw[12].command[7] = f3; + i = 0; while (lcdw[i].len != 0) { write(sock,lcdw[i].command,lcdw[i].len); i++; } free(lcdw); +} + +int logitech_mediapad(int sock) { + DBusMessage *db_msg, *db_msg_reply; DBusConnection *db_conn = NULL; DBusError db_err; DBusMessageIter db_args; dbus_uint32_t db_u1, db_u2; + char buf[25], *cwtmp; struct pollfd p; int fd = 0, mode = 0, discard_keyup = 0, prev_key = 0, icons = 0, on_dbus = 0, last_dbus_poll = 0, ln = 0; + memset(&p,0,sizeof(struct pollfd)); p.fd = sock; p.events = POLLIN | POLLHUP | POLLERR; + + setsid(); sleep(3); /* Give time for "Connected :-)" to go away */ + openlog("dinovod",LOG_NDELAY | LOG_CONS | LOG_PID,LOG_DAEMON); + + /* Register with uinput */ + if ((fd = uinput_create("Logitech Mediapad - Bluetooth Remote Commander", 1, 0)) < 4) { + close(sock); + closelog(); + return -1; + } + + set_clock(sock); + while (!__io_canceled) { + if (!on_dbus) { + if ((time(NULL) - last_dbus_poll) > 60) { + /* Get-on-D-Bus :P */ + dbus_error_init(&db_err); + if (!(db_conn = dbus_bus_get(DBUS_BUS_SYSTEM,&db_err))) { + syslog(LOG_ERR,"Unable to connect to DBUS! Will retry in 60 sec. (%s)",db_err.message ? db_err.message : "Out of Memory?"); + } else { + on_dbus = 1; + + /* Set our name */ + ln = dbus_bus_request_name(db_conn,"com.hentenaar.Dinovo.MediaPad",DBUS_NAME_FLAG_REPLACE_EXISTING,&db_err); + if (dbus_error_is_set(&db_err) || ln != DBUS_REQUEST_NAME_REPLY_PRIMARY_OWNER) { + on_dbus = 0; dbus_connection_unref(db_conn); db_conn = NULL; + if (ln == DBUS_REQUEST_NAME_REPLY_PRIMARY_OWNER) + syslog(LOG_ERR,"Unable to own com.hentenaar.Dinovo.MediaPad! (%s)",db_err.message ? db_err.message : "No Error Message"); + __io_canceled = 1; break; + } else { + /* Send the "Connected" signal */ + dinovo_dbus_do_signal("Connected"); + } + } + + last_dbus_poll = time(NULL); + } + } else { + /* Poll for DBUS messages */ + dbus_connection_read_write(db_conn, 0); + if ((db_msg = dbus_connection_pop_message(db_conn))) { + if (dbus_message_is_signal(db_msg,DBUS_INTERFACE_LOCAL,"Disconnected")) { + dbus_connection_unref(db_conn); + on_dbus = 0; db_conn = NULL; + } else if (strlen(dbus_message_get_interface(db_msg)) == 35 && !strncmp(dbus_message_get_interface(db_msg),"org.freedesktop.DBus.Introspectable",35)) { + db_msg_reply = dbus_message_new_method_return(db_msg); + dbus_message_iter_init_append(db_msg_reply,&db_args); + dbus_message_iter_append_basic(&db_args,DBUS_TYPE_STRING,&introspect_ret); + dbus_connection_send(db_conn,db_msg_reply,NULL); dbus_connection_flush(db_conn); dbus_message_unref(db_msg_reply); + } else if (dbus_message_is_method_call(db_msg,"com.hentenaar.Dinovo.MediaPad","BlinkOrBeep")) { + /* BlinkOrBeep(beep_type, blink) + * [beep_type := 0 (none) | 1 (low beep) | 2 (beep-beep) | 3 (short beep) ] + * [blink := 0 (no) | 1 (yes) ] + */ + if (dbus_message_iter_init(db_msg,&db_args)) { + db_u1 = db_u2 = 0; + if (dbus_message_iter_get_arg_type(&db_args) == DBUS_TYPE_UINT32) dbus_message_iter_get_basic(&db_args,&db_u1); + if (dbus_message_iter_has_next(&db_args)) { + dbus_message_iter_next(&db_args); + if (dbus_message_iter_get_arg_type(&db_args) == DBUS_TYPE_UINT32) dbus_message_iter_get_basic(&db_args,&db_u2); + } + beep_or_blink(sock,db_u1,db_u2); + } + dinovo_dbus_do_reply(db_msg); + } else if (dbus_message_is_method_call(db_msg,"com.hentenaar.Dinovo.MediaPad","WriteText")) { + /* WriteText(text) Max Length: 144 */ + if (dbus_message_iter_init(db_msg,&db_args)) { + if (dbus_message_iter_get_arg_type(&db_args) == DBUS_TYPE_STRING) { + dbus_message_iter_get_basic(&db_args,&cwtmp); + if (cwtmp && strlen(cwtmp) > 0) write_lcd_text(sock,cwtmp); + } + } + dinovo_dbus_do_reply(db_msg); + } else if (dbus_message_is_method_call(db_msg,"com.hentenaar.Dinovo.MediaPad","SetIndicator")) { + /* SetIndicator(indicator, blink) + * [ indicator := see LCD_ICON_* above ] + * [ blink := 0 (off) | 1 (on) | >= 2 (blink) ] + */ + if (dbus_message_iter_init(db_msg,&db_args)) { + if (dbus_message_iter_get_arg_type(&db_args) == DBUS_TYPE_UINT32) dbus_message_iter_get_basic(&db_args,&db_u1); + if (dbus_message_iter_has_next(&db_args)) { + dbus_message_iter_next(&db_args); + if (dbus_message_iter_get_arg_type(&db_args) == DBUS_TYPE_UINT32) dbus_message_iter_get_basic(&db_args,&db_u2); + } + set_lcd_indicator(sock,db_u1,db_u2); + } + dinovo_dbus_do_reply(db_msg); + } else if (dbus_message_is_method_call(db_msg,"com.hentenaar.Dinovo.MediaPad","SyncClock")) { + /* SyncClock() */ + set_clock(sock); + dinovo_dbus_do_reply(db_msg); + } + dbus_message_unref(db_msg); + } + } + + p.revents = 0; p.fd = sock; + if (poll(&p,1,1) < 0) { __io_canceled = 1; break; } + if (p.revents & POLLIN) { + if ((ln = read(p.fd, buf, sizeof(buf))) <= 0) { __io_canceled = 1; break; } + if (buf[1] == 0x03) { /* Special Keys */ + /* e9 = vol up, ea = vol down, e2 = mute, b5 = ffwd, b6 = rew, b7 = stop, cd = play/pause */ + if (buf[2] == (char)0x83 && buf[3] == 0x02) { clear_screen(p.fd); if (icons & LCD_ICON_MUTE) { icons = LCD_ICON_MUTE; set_lcd_indicator(p.fd, LCD_ICON_MUTE, 1); }} + if (buf[2] == (char)0x00 && buf[3] == 0x00) { if (prev_key != 0) { inject_key(fd,prev_key,0); prev_key = 0; } + if (discard_keyup) discard_keyup = 0; else mode = 0; } + if (buf[2] == (char)0x83 && buf[3] == 0x01) { prev_key = KEY_PHONE; inject_key(fd,prev_key,1); } /* Media key */ + if (buf[2] == (char)0xb5 && buf[3] == 0x00) { prev_key = KEY_NEXTSONG; inject_key(fd,prev_key,1); discard_keyup = 1; } + if (buf[2] == (char)0xb6 && buf[3] == 0x00) { prev_key = KEY_PREVIOUSSONG; inject_key(fd,prev_key,1); discard_keyup = 1; } + if (buf[2] == (char)0xb7 && buf[3] == 0x00) { prev_key = KEY_STOP; inject_key(fd,prev_key,1); } + if (buf[2] == (char)0xcd && buf[3] == 0x00) { prev_key = KEY_PLAYPAUSE; inject_key(fd,prev_key,1); } + if (buf[2] == (char)0xe2 && buf[3] == 0x00) { prev_key = KEY_MUTE; inject_key(fd,prev_key,1); + icons = ((icons & LCD_ICON_MUTE) != 0) ? (icons & ~LCD_ICON_MUTE) : (icons | LCD_ICON_MUTE); + set_lcd_indicator(p.fd, LCD_ICON_MUTE, ((icons & LCD_ICON_MUTE) != 0) ? 1 : 0); } + if (buf[2] == (char)0xe9 && buf[3] == 0x00) { prev_key = KEY_VOLUMEUP; inject_key(fd,prev_key,1); + icons = (icons & ~LCD_ICON_MUTE); set_lcd_indicator(p.fd, LCD_ICON_MUTE, 0); } + if (buf[2] == (char)0xea && buf[3] == 0x00) { prev_key = KEY_VOLUMEDOWN; inject_key(fd,prev_key,1); + icons = (icons & ~LCD_ICON_MUTE); set_lcd_indicator(p.fd, LCD_ICON_MUTE, 0); } + } else if (buf[1] == 0x01 && buf[2] == 0x00) { + if (buf[4] == 0x53 && buf[5] == 0x00) { mode = 1; prev_key = 0; } /* NAV key */ + else if (buf[4] == 0x00 && buf[5] == 0x00 && prev_key != 0) inject_key(fd,prev_key,0); + else if (buf[4] != 0x00) { prev_key = translate_key(mode,buf[4] & 0x7f); inject_key(fd,prev_key,1); } + } else if (buf[1] == 0x11 && buf[2] == 0x0a) { /* Calculator Result */ + //cwtmp = &buf[4]; while (*cwtmp && *cwtmp == 0x20) cwtmp++; + syslog(LOG_WARNING,"Got Calc result"); + } + } + usleep(20); + } + + if (db_conn) { dinovo_dbus_do_signal("Disconnected"); dbus_connection_unref(db_conn); } + ioctl(fd, UI_DEV_DESTROY); + close(fd); + close(sock); + closelog(); + return 0; +} + diff -ru bluez-utils-3.8/hidd/hidd.h bluez-utils-3.8/hidd/hidd.h --- bluez-utils-3.8/hidd/hidd.h 2006-09-29 17:49:18.000000000 -0400 +++ bluez-utils-3.8/hidd/hidd.h 2006-12-29 18:31:36.000000000 -0500 @@ -32,3 +32,5 @@ int headset_presenter(const bdaddr_t *src, const bdaddr_t *dst, uint8_t channel); int jthree_keyboard(const bdaddr_t *src, const bdaddr_t *dst, uint8_t channel); int celluon_keyboard(const bdaddr_t *src, const bdaddr_t *dst, uint8_t channel); +int logitech_mediapad(int sock); + diff -ru bluez-utils-3.8/hidd/main.c bluez-utils-3.8/hidd/main.c --- bluez-utils-3.8/hidd/main.c 2006-09-29 17:49:18.000000000 -0400 +++ bluez-utils-3.8/hidd/main.c 2006-12-29 18:31:28.000000000 -0500 @@ -506,15 +506,22 @@ exit(1); } - err = create_device(ctl, csk, isk, subclass, 1, 1, bootonly, encrypt, timeout); - if (err < 0) { - fprintf(stderr, "HID create error %d (%s)\n", - errno, strerror(errno)); - close(isk); - sleep(1); - close(csk); - close(ctl); - exit(1); + if (!strcmp(req.name,"Logitech Bluetooth Mediapad")) { + if (!fork()) { + logitech_mediapad(isk); + close(ctl); + exit(0); + } + } else { + err = create_device(ctl, csk, isk, subclass, 1, 1, bootonly, encrypt, timeout); + if (err < 0) { + fprintf(stderr, "HID create error %d (%s)\n",errno, strerror(errno)); + close(isk); + sleep(1); + close(csk); + close(ctl); + exit(1); + } } } diff -ru bluez-utils-3.8/hidd/Makefile.am bluez-utils-3.8/hidd/Makefile.am --- bluez-utils-3.8/hidd/Makefile.am 2006-09-21 17:28:45.000000000 -0400 +++ bluez-utils-3.8/hidd/Makefile.am 2006-12-29 18:31:03.000000000 -0500 @@ -1,15 +1,19 @@ +if CONFIGFILES +dbusdir = $(sysconfdir)/dbus-1/system.d +dbus_DATA = dinovo.conf +endif bin_PROGRAMS = hidd hidd_SOURCES = main.c hidd.h sdp.c uinput.h fakehid.c -hidd_LDADD = @BLUEZ_LIBS@ -lm $(top_builddir)/common/libhelper.a +hidd_LDADD = @BLUEZ_LIBS@ @DBUS_LIBS@ -lm $(top_builddir)/common/libhelper.a -AM_CFLAGS = @BLUEZ_CFLAGS@ +AM_CFLAGS = @BLUEZ_CFLAGS@ @DBUS_CFLAGS@ INCLUDES = -I$(top_srcdir)/common man_MANS = hidd.1 -EXTRA_DIST = $(man_MANS) fakehid.txt +EXTRA_DIST = $(man_MANS) fakehid.txt dinovo.conf MAINTAINERCLEANFILES = Makefile.in